HOME Deutsch   HOME English


Detail Page: OTP57V eSOM2586 X86 Series
Operator Touch Panel Linux / Java

      

System-on-Module  
CPU Vortex86DX 32 bit x86 SoC (SSV eSOM2586 CPU Board)
Speed 800 MHz (600Mhz optional)
BIOS PC-compatible AMI Basic I/O System
RAM 128 MByte DDR2 SDRAM @ 300 MHz bus speed
Flash 1024 MByte NAND-type
LCD Interface 18-bit TTL interface, VGA-based for TFT/STN panels
LCD Video Memory 64 MByte video RAM with DDR2 interface
Touch Screen Interface 4-wire for resistive touch panels (UART-based)
RTC 1x Real Time Clock with external battery-backup
Watchdogs 1x timer watchdog, 1x power supervisor
Mechanical eSOM-200 form factor (2x 100-pin Hirose FX8C connector)
   
I/O  
UART 2x RS232, 1x RS485 (16C550/16C552 compatible)
LAN 1x 10/100 Mbps Ethernet
CAN 1x SJA1000 with FullCAN and BasicCAN support

USB

2x USB host port for external USB devices with HS (480 Mbps), FS and LS support

LCD

5.7 VGA-size (14cm) with 18-bit digital RGB interface and LED backlight
Touch

4-wire analog resistive touch sensor

Keyboard

External, via USB interface (Option)

GPIO

7-bit general purpose input output signals from eSOM/2586 PIO Port B

SPI

1x SPI master interface with one chip select output signal

LED Output 2x LED output signals for external power and LAN activity LED
   
Special Functions  
O/S Linux 2.6.18 (Debian-based) with X Server and Java 6 (J2SE) run time environment
GUI Support Java Swing widget toolkit and API
Backlight Controller

Programmable LED backlight controller for LCD

SSD Expansion 1x CompactFlash (CF) socket with IDE-based interface
Server HTTP(S), Telnet, SSH, (S)FTP for Ethernet-based access
   
Other  
Mechanical

Open frame architecture with four mounting points

Base Board

BB6/eSOM

3U Front Panel Size 162.2 mm x 128.8 mm
Deepth 32mm, with used power connector: min. 50...55mm for safe cable routing
Power 12 – 24 VDC
Operating Temperature 0 – 60 °C (extended temperature range on request)
Storage Temperature -20 – 70 °C
   
Delivery  
OTP/57V Embedded User Interface device with eSOM/2586, base board BB6/eSOM, 5.7” VGA LCD, touch screen, front panel for 3U 19” rack mounting
Manufactured: This product fullfills the criteria: Made in Germany = German product  for highest industrial quality!

Gallery - click for full size:
 


Picture: Backside with USB / LAN / PIO / COM connectors


Picture: OTP system with silicone / rubber keyboard (option)


Picture: System in 19" rack (front)


Picture: Main Setup Display

Picture: Information Setup

Picture: System in 19" rack (rear)

     

Picture: IP Setup

Picture: Services Telnet, SSH, FTP, Web...

Picture: COM Port Configuration


Picture: CAN Configuration

Picture: Adjustable Display Brightness

Picture: Date / Time Config

Picture: CAN Sniffer for onboard CAN
   

 


AE SYSTEME www.terminal-systems.de
Technische Angaben ohne Gewähr. Die Bilder zeigen Beispiele.
Technical information on this pages may change on result of further development. Last Update: 21.08.2015
(c) AE/hjw: AE Systeme www.terminal-systems.de - Lösungen für Industrial IT | D-31303 Burgdorf
info@terminal-systems.de